cooper bussmann

CCP-Compact Circuit Protector,Class CC,Midget 10*38

  
Specifications
Description: The revolutionary Cooper Bussmann® CCP is 1/3 the footprint of a circuit breaker. The level of protection provided by the CCP is up to three times the Short-Circuit Current Rating (SCCR) at full voltage than a molded case circuit breaker while providing disconnecting means.

Ratings:
• Box Lug Connection: 18-6AWG single or dual rated, solid or stranded – 75ºC or higher - Cu only, 4AWG single – 75ºC or higher - Cu only
• Spade Terminal Connection: Max 30A suitable for use with #8-32UNC screw
• Box Lug and Spade Terminal suitable for line, load or accessory connection
• Torque: 18-10AWG 20 lb-in; 8-4AWG 35 lb-in
• Lock-out/tag-out: 4mm shank lock or standard pin-out devices
• 35mm DIN Rail Mount
• Local indication minimum operating voltage: 90Vac for AC version; 12Vdc for DC version

Agency Information:
• For Class CC fuse version
UL 98 Listed, File E302370, Guide WHTY; cULus to CSA Standard 22.2 No. 4-04, File 302370, Guide WHTY7; CE Compliant
• For UL Midget and 10X38 IEC fuse version
UL 508 Listed, File E161278, Guide 8R29; cULus Certified 22.2 No. 14-05; IEC 60947-3 AC23A; IEC 60947-3 DC23A; CE Compliant

Features and Benefits:
• Extremely compact design at 17.5mm wide per pole
• High Short-Circuit Current Ratings up to 200kA
• Disconnect Rated to provide means for load isolation
• Full Voltage Rated 600Vac or 80Vdc
• UL 98 disconnect rated for protection of branch circuits with Low-Peak® CUBEFuse and Class CC fuses.
• Suitable for Global Installations, the units Complies with UL, CSA, and IEC standards accepting UL Class CC, Class CF Low-Peak CUBEFuse with Class J performance, Midget or IEC aM and gG fuses
• Horsepower rated for protecting motor circuits with CUBEFuse and Class CC units.
• Open Fuse Indication
Local fuse indication lights* are standard
Optional wired remote open fuse indication can be utilized to signal a PLC and open a contactor to de-energize all phases, if required.
• IP20 finger-safe construction with 10AWG wire or larger
• Built-in switch interlock capability prohibits removing the fuse under load
• Padlockable handle for lock-out/tag-out procedures
• Available in 1-, 2- and 3-pole versions
*Circuit must be closed for indication light to illuminate

Environmental Data:
• RoHS Compliant: Yes
• Storage and Operating Temperature: -20ºC to 75ºC**
• CE Compliant: Yes
**For fuse performance under or above 25ºC, consult fuse performance
derating charts in the Cooper Bussmann publication titled Selecting
Protective Devices (SPD) reorder #3002.


Technical Ratings
Catalog Number Poles Amp Rating Voltage Rating Fuse Type Max.Fuse Ampacity SCCR Agency Approvals Hp Ratings
CCP-1-30CC 1 30 600Vac Class CC 30A 200kA UL 98 Listed cULus 22.2 No.4-04 0.5Hp@120V
CCP-2-30CC 2 30 600Vac Class CC 30A 200kA UL 98 Listed cULus 22.2 No.4-04 2.0Hp@240V
CCP-3-30CC 3 30 600Vac Class CC 30A 200kA UL 98 Listed cULus 22.2 No.4-04 3Hp@240V 5Hp@480V 7.5Hp@600V
CCP-1-30M 1 30 240Vac* UL UL Midget 30A 10kA* UL 508 Listed cULus 22.2 No.14-05  
400Vac* IEC 10x38 IEC 32A aM,25A gG 120kA* IEC 60947-3 AC23A  
CCP-2-30M 2 30 240Vac* UL UL Midget 30A 10kA* UL 508 Listed cULus 22.2 No.14-05  
400Vac* IEC 10x38 IEC 32A aM,25A gG 120kA* IEC 60947-3 AC23A  
CCP-3-30M 3 30 240Vac* UL UL Midget 30A 10kA* UL 508 Listed cULus 22.2 No.14-05  
400Vac* IEC 10x38 IEC 32A aM,25A gG 120kA* IEC 60947-3 AC23A  
CCP-1-DCC 1 30 80V dc* Class CC(DC rated) 30A 20kA* UL 98 Listed CSA 22.2 No.4-04  
CCP-1-DCM 1 30 80V dc* UL Midget 30A 10kA* UL 508 Listed cULus 22.2 No.14-05  
10x38 IEC 32A aM,25A gG IEC 60947-3 DC23A  

*Rating may be lower depending on installed fuse. Refer to fuse data sheet.

Accessories
Catalog Number Description Configuration Signal Output Minimum Circuit Voltage Agency Approvals
CCP-AUX Auxiliary Contacts NO+NC for Switch Status 1 per CCP 5A/240Vac - Ul 98 Recogniaed and cURus 22.2 No. 4-04, IEC 60947-5-1 AC15
CCP-PLC-INC Wired Remote Fuse Indication for PLC Applications 1 per CCP 24Vdc 100Vac UL 98 Recogniaed and cURus 22.2 No. 4-04


CCP-AUX


CCP-PLC-IND (Includes spade terminals)
----------------------------------
Bussmann规格资料查询
Bussmann产品规格类型
或许您会感兴趣...
联系客服
深圳市博孚美科电子有限公司
总机: 0755-82862885, 82862629
传真: 总机 转 801
邮箱: service@bussmann.net.cn
网址: http://www.bussmann.net.cn
资料中心: http://bm-bussmann.com