CB61F Series Fast-Acting Brick™ Fuses,Replace 6125FA & 6125FF Series - 伊顿EATON Bussmann series产品资料中心

Description

The fast-acting CB61F Series of SMD Brick™ fuse provides high breaking capacity performance in a CQC Approved SMD package.
The CB61F Series offers 125Vac/50A and 125Vdc/300A protection up to 15 amps, which is among the highest in its class.

Features

• High Interrupting Ratings: 50A @ 125Vac / 300A @ 125Vdc

• Wide Selection: The CB61F Series is available in ratings from 2 to 15 amps providing a range of solutions for applications requiring fast-acting performance

• CQC Approved: Meets the growing market demand.

• cULus Certified and PSE Level 1 Certified

• Excellent Environmental Integrity: lead-free, halogen free and RoHS compliant, and present no disposal issues at end of life.

• Solder immersion compatible

• Wire-in-Air design

Applications

• LCD/PDP TVs
• LCD Monitors
• LCD backlight inverters

• Notebooks
• Servers
• Power supplies

• Telecom/PoE
• Medical equipment
• White goods

• Industrial applications

Agency Information

• cULus: Standard UL 248-14, Guide JDYX, File E 19180 and Guide JDYX7, File E19180

• PSE:
JET 1641-31007-1003 (2A-5A)

JET 1641-31007-1004 (6.3A-10A)

JET 1641-31007-1005 (12-15A)

• CQC: CQC09012040316 (2A-6.3A & 8A-10A)

Ordering

Specify product and packaging code

Environmental Data

• Mechanical Shock: MIL-STD-202G, Method 213B, Test Condition C (100 G’s peak for 6 milliseconds; half-sine waveform)

• Mechanical Vibration: MIL-STD-202G, Method 201,Test Condition A (10-55Hz, 0.06 inch, total excursion)

• Insulation Resistance: MIL-STD-202, Method 302, Test Condition A (after opening) 10,000 ohms minimum

• Resistance to Solder Heat: MIL-STD-202G, Method 210F, Test Condition D (10 sec, at 260°C); Test Condition A (350°C, 5s) for hand solder

• Thermal Shock: MIL-STD-202, Method 107G, Test Condition B (-65°C to +125°C)

Dimensions - mm

Drawing Not to Scale

Recommended Pad Layout

Specifications

Catalog Number	Current Ratings (amps)	Voltage Ratings		Interrupting Ratings (amps)*		Typical Cold Resistance (Ω)**	Typical Melting I2t (A2s)***	Typical Voltage Drop (mV)‡	Agency Approvals
Catalog Number	Current Ratings (amps)	Vac	Vdc	125Vac	125Vdc	Typical Cold Resistance (Ω)**	Typical Melting I2t (A2s)***	Typical Voltage Drop (mV)‡	cULus	PSE	CQC
CB61F2A	2A	125	125	100	300	0.039	0.85	100	X	X	X
CB61F3A	3A	125	125	100	300	0.025	2.08	100	X	X	X
CB61F4A	4A	125	125	100	300	0.017	4.4	93	X	X	X
CB61F5A	5A	125	125	100	300	0.013	7.7	90	X	X	X
CB61F6.3A	6.3A	125	125	100	300	0.010	13.7	90	X	X	X
CB61F7A	7A	125	125	100	300	0.009	15.6	85	X	X
CB61F8A	8A	125	125	100	300	0.008	19.5	90	X	X	X
CB61F10A	10A	125	125	100	300	0.006	36	90	X	X	X
CB61F12A	12A	125	125	50	300	0.005	40	90	X	X
CB61F15A	15A	125	125	50	300	0.004	56	85	X	X

* AC Interrupting Rating (measured at designated voltage, 100% power factor); DC Interrupting Rating (measured at designated voltage, time constant of less than 50 microseconds, battery source)

** Typical Cold Resistance (measured at 10% of rated current)

*** Typical Melting I2

t (measured with a battery bank at rated DC voltage, 10x-rated current, time constant of calibrated circuit less than 50 microseconds)

‡ Typical Voltage Drop (measured at rated current after temperature stabilizes)

Time-Current Curves

Soldering Characteristics

Wave Immersion

• Reservoir Temperature: 260° C

• Time in Reservoir : 10 Seconds Maximum Infrared Reflow

• Temperature: 260° C

• Time: 30 Seconds Maximum

Hand Soldering

• Maximum tip temperature: 350°C

• Maximum soldering time: 5 seconds max

Recommend Reflow Profile

Packaging Code

Packaging Code Suffix	Description
-TR1	1000 Fuses in Tape and Reel on 7 inch (178mm) diameter reel
-TR2	5000 Fuses in Tape and Reel on 13 inch (330mm) diameter reel