6125TD Series Time Delay Brick™ Fuses - 伊顿EATON Bussmann series产品资料中心

Description

•Time Delay surface mount fuse

• Complies with EIA-IS-722 Standard

•Solder Immersion Compatible

ELECTRICAL CHARACTERISTICS

% of Amp Rating	Opening Time
100%	4 Hours Minimum
200%	1 Second Minimum
200%	2-4 Seconds Typical
200%	60 Seconds Maximum

Agency Information

• UL Recognition Guide & File numbers:JDYX2 & E19180.

• CSA Component Acceptance: 053787 C 000 & Class No: 1422 30.

Environmental Data

• Life Test: MIL-STD-202, Method 108A, Test Condition D

• Load Humidity: MIL-STD-202, Method 103B

• Moisture Resistance: MIL-STD-202, Method 106E

• Thermal Shock: MIL-STD-202, Method 107D, air-to-air

• Case Resistance: EIA/IS-722

• Resistance to Dissolution of Metallization:ANSI J-STD-002, Test D

• Mechanical Shock:MIL-STD-202, Method 213B,Test Condition A

• High Frequency Vibration: MIL-STD-202, Method 204D,Test Condition D

• Resistance to Solvents: MIL-STD-202, Method 215A

Ordering

• Specify packaging and product code

(i.e., TR1/6125TD500-R)

Soldering Method

•Wave Immersion: 260°C, 10 sec max.

•Infrared: 260°C, 30 sec max.

Dimensions mm⁄(inches)

SPECIFICATIONS

Product Code	Current Rating	Voltage Rating AC DC		Interrupting Rating* 125VAC 60VDC		Resistance (ohms)** Typ.	Typical Melting I2t†	Typical Voltage Drop‡
6125TD500-R	500mA	125V	60V	50A	50A	0.4025	0.716	245 mV
6125TD750-R	750mA	125V	60V	50A	50A	0.2350	1.07	250 mV
6125TD1-R	1A	125V	60V	50A	50A	0.1680	2.88	256 mV
6125TD1.5-R	1.5A	125V	60V	50A	50A	0.0630	2.35	125 mV
6125TD2-R	2A	125V	60V	50A	50A	0.0480	9.45	133 mV
6125TD2.5-R	2.5A	125V	60V	50A	50A	0.0350	16.2	130 mV
6125TD3-R	3A	125V	60V	50A	50A	0.0263	15.3	97 mV
6125TD3.5-R	3.5A	125V	60V	50A	50A	0.0195	14.5	95 mV
6125TD4-R	4A	125V	60V	50A	50A	0.0185	38.8	106 mV
6125TD5-R	5A	125V	60V	50A	50A	0.0133	34.4	100 mV
6125TD7-R	7A	125V	60V	50A	50A	0.0087	90.2	99 mV

* AC Interrupting Rating (Measured at designated voltage, 100% power factor); DC Interrupting Rating (Measured at designated voltage, time constant of less than

50 microseconds, battery source)

** DC Cold Resistance (Measured at 10% of rated current)

† Typical Melting I2

t (Measured with a battery bank at rated DC voltage, 10x-rated current (not to exceed IR), time constant of calibrated circuit less than 50 microseconds)

‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes)

Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recommended, with further derating required at

elevated ambient temperatures

TIME CURRENT CURVE

PACKAGING CODE

Packaging Code	Description
TR1	1000 pieces of fuses on 12mm tape-and-reel on a 7 inch (177mm) reel per EIA Standard 481